Skip to content
HELIOS-logo-330px-new
awnings-emma

EMMA - CASSETTE AWNING

The EMMA cassette awning is a smart sun shade with a rounded cassette which is suitable for places where the exposed construction would be difficult or impracticle.

The cassette has an aesthetic as well as protective function, when coiled the fabric is perfectly hidden inside the cassette being thus protected against external weather. Mounting brackets allow an easy installation and adjustment of arms from the vertical up to horizontal.

The awning coat is manufactured from a special awning fabric DICKSON and SATTLER. The same material is also used for the pelmet whose shape and size are optional. A canopy is not necessary because the cassette completely protects the fabric against unfavourable weather conditions.

EMMA - CASSETTE AWNING

Some of the benefits and highlights of the Helios EMMA cassette awnings from CMS Doors.

  • For small and large terraces and verandas
  • Large choice of fabrics
  • Special coating with 10-year warranty
  • Premium dyes ensure high colour fastness of fabrics
  • Option for motorised control and choice of sun / wind sensor
  • Maximum extension of 3.5 m
  • Awning arms made of special aluminium alloy
emma-cassette-awning-close-up

CONTROL

Manually – by handle with winding booster

Motorised drive – remote control or switch

Wide ranging offer of accessories (sensor sun/wind, emergency lever, switch with integrated electronics, waterproof switch on the wall, etc.).

TECHNICAL INFORMATION

Cassette awning is elegant solar shading with a rounded cassette and is recommended for areas where  open construction can be disturbing.  The cassette fulfils both an aesthetical and a protective function. After rolling-in, the fabric is completely hidden in the cassette and is fully protected against the effects of the weather.

EXTENSION
3m

MAXIMUM EXTENSION
3m

MAXIMUM WIDTH
5m

MINIMUM WIDTH
2.050 m (motor); 2.120 m (handle)

ARM TYPE
Folding, aluminium, with springs and belt

MOTION ANGLE
0° – 50°

WINDING SHAFT SIZE
70 mm, 78 mm

STRUCTURE COLOUR
Standard white RAL 9016, other RAL colours available

PELMET
Height 21 cm (+/- 0.5 cm)

MANUAL CONTROL
Handle 150 cm, 180 cm, 250 cm

ELECTRIC CONTROL
Motor, motor with emergency handle, remote control, wind/sun/shock sensor

ASSEMBLY
To the facade into the ceiling

BESPOKE PRINTED AWNING
On request

FABRIC OPTIONS

We offer 2 options on the awning fabric, Dickson or Sattler, see below for details on each.

DICKSON AWNING FABRICS

Awning´s fabrics have special surface treatment CLEANGARD which uses ultra-modern fabric protection NPP (Nanotechnology Protection Process). This technology brings maximal water resistancy and protects the fabric against water and dirt from long term view.

Elimination of up to 95 % of sunlight / heat. Used fiber SUN ACRYL and technology of fabric coloring (solution dyed acrylic) ensures high color stability of awning´s fabrics.

Awning´s fabrics are non-toxic and therefore health-consciousness and environmental friendliness is guaranteed. We provide warranty for mold resistance and for color stability (min. 7/8 color stability after ultraviolet rays exposure and bad wind conditions according to standards NF ISO 105 B02 a NF EN ISO 105 B04) for all fabrics for 10 years.

SATTLER AWNING FABRICS

The fabrics feature special TEXgard surface finish, distinguished by superior quality and long-term protection. This technology prevents ageing and the fabric retains its appearance for a much longer time. Each strand is carefully covered with this protective layer, preventing penetration of water, moisture, and dirt, and supporting the self-cleaning effect. Dirty drops therefore cannot penetrate the fabric, but they remain on its surface and flow down. Each fabric from this collection is made of 100 % premium acrylic. The fabric manufacture is environmentally-friendly and is ISO certified.

If the awning fabric is properly maintained, it will remain protected and retain its modern appearance for many years thanks to the technology used. SATTLER fabrics are distinguished by their design, they are very pleasant to the touch, colour-fast, they feature high UV protection, protect from various vagaries of the weather, and repel dirt.

According to their composition and properties, SATTLER awning fabrics are classified in three categories: ELEMENTS, LUMERA, and LUMERA 3D. Fabrics in ELEMENTS category are made of 100 % basic acrylic fibre, constituting the unique textile surface of all fabrics within this category. Due to the added TEXgard technology, the fabrics give the product excellent properties like rain and sunlight protection and resistance to dirt. Thanks to the acrylic yarn, the fabrics remain bright and attractive. This category includes Design and Stripes collections.

Fabrics in LUMERA category are composed of 66 % basic acrylic fibre and 33 % CBA (Clean Brilliant Acrylic). This means one third of the fabric is pure, high-quality acrylic, providing smoother and firmer fabric surface, increasing the self-cleaning effect, the colours are shinier and remain cleaner for a longer time. This category includes Landscape, Landscape Mini, Solids 1, and Solids 2 collections.

The last category is LUMERA 3D, with fabrics composed of 33 % basic acrylic fibre and 66 % CBA. Fabrics in this category contain twice as much pure, high-quality acrylic than LUMERA fabrics, making them unique in appearance and extremely pleasant to the touch. Fine structure of the fabric is combined with a special optical effect. LUMERA category includes Surface collection fabrics.

BROCHURE DOWNLOAD

Find out more in the Awnings brochure

Scroll To Top